Daily inspection of the air compressor is a basic step in maintenance. Before each construction, workers need to check the oil level and oil quality of the compressor. If the oil is insufficient or turns black and turbid, it is necessary to replenish or replace the oil of the same model in a timely manner to avoid wear of internal parts of the compressor due to insufficient lubrication. At the same time, check the pressure gauge and safety valve of the compressor to ensure that the pressure display is accurate and the safety valve can jump normally, preventing equipment failure caused by abnormal pressure.
The cleaning of the air filter element of the compressor cannot be ignored. The Air Reverse Circulation Drilling Rig has high requirements for the cleanliness of compressed air. If the filter element is blocked, it will lead to insufficient air intake and affect drilling efficiency. Workers need to disassemble the air filter element regularly and use compressed air to blow off the dust and impurities on its surface. If the filter element is damaged or aged, it is necessary to replace it with a new one in time to prevent impurities from entering the inside of the compressor, which may affect the quality of compressed air and the service life of the equipment.
The maintenance of the compressor's heat dissipation system is also crucial. During construction, the compressor will generate a lot of heat when running for a long time. If heat dissipation is not timely, the equipment temperature will be too high. Workers need to regularly clean the dust on the cooling fan and radiator fins to ensure that the fan rotates normally and the heat dissipation channel is unobstructed. When constructing in hot weather, it is also necessary to appropriately shorten the continuous operation time of the compressor to avoid automatic shutdown of the compressor due to overheating, thus ensuring the overall operation rhythm of the Air Reverse Circulation Drilling Rig.